Reliability and Safety Software Download
Get a quote
Reliability and Safety Software Demo


 
 
 
 
Reliability Software, Safety and Quality Solutions / Reliability / Fault Tree Analysis (FTA)

Fault Tree Analysis (FTA)

A Fault Tree Analysis (FTA) is a systematic deductive, top-down method of analyzing system design and performance. It involves specifying a top event to analyze (such as catastrophic system behavior), followed by identifying all of the associated elements in the system that could cause that top event to occur. It clearly identifies fault relationships and provides a methodical approach to predict the probability that some top-level events will or will not occur.

Fault Trees provide a convenient symbolic representation of the combination of events resulting in the occurrence of the top event. Fault tree analyses are generally performed graphically using a logical structure of AND and OR gates.

This analysis is often applied to identify critical design and/or safety weaknesses early in the development process. It is also useful for the development of diagnostic approaches.

RAM Commander's FTA software module
(Fault Tree Analysis) is the latest addition to the unique scope of the RAM Commander features. It implements and summarizes the first-hand experience gained by the SoHaR FTA experts in hundreds of projects where they used RAM Commander and other SoHaR software.

RAM Commander FTA software module is a powerful tool with the following features:

  • Up-to-date, intuitive and powerful fault tree diagram interface with possibilities of full control over the diagram: elements location, colors, styles, zooms etc.

  • Convenient ways of diagram printing and simple Copy & Paste transfer to other applications

  • Easy to use and reusable Events Library

  • Calculation of Unavailability, Mean Unavailability, and Minimal Cut Sets.

  • Calculation of Importance and Sensitivity

  • Calculation of Frequency, Intensity, Uncertainty (release 2009)

  • Set of required reports - tree, tree diagram, events library, MCS etc.

  • Connection between FTA and product tree/reliability module

  • Connection between FTA and FMECA

  • Automatic creation of the fault tree from FMECA

  • Automatic creation of the fault tree from Potential Process/Design FMEA

  • Automatic creation of the fault tree from RBD (release 2009)

  • Unique graphical FTA Unavailability Improvement by regulation of basic events parameters (release 2009)



    FTA basics
    Fault Trees are one of the most widely used methods in system reliability and failure probability analysis. A Fault Tree is a graphical representation of events in a hierarchical, tree-like structure. It is used to determine various combinations of hardware, software, and human error failures that could result in a specified risk or system failure. System failures are often referred to as top events. A deductive analysis using a Fault Tree begins with a general conclusion or hazard, which is displayed at the top of a hierarchical tree. This deductive analysis is the final event in a sequence of events for which the Fault Tree is used to determine if a failure will occur or, alternatively, can be used to stop the failure from occurring. The remainder of the Fault Tree represents parallel and sequential events that potentially could cause the conclusion or hazard to occur and the probability of this conclusion.

    A fault tree is a graphical representation of a logical structure representing undesired events ("failures") and their causes. You create the logical structure by using gates and represent undesired events by using basic events. Reliability parameters are assigned to the basic events. Widely used in system reliability studies, fault tree analysis offers the ability to focus on an event of importance, such as a highly critical safety issue, and work to minimize its occurrence or consequence. The probability of the top-level event can then be determined by using mathematical techniques. The resulting fault tree diagram is a graphical representation of the chain of events in your system or process, built using events and logical gate configurations.

    Fault Trees are composed of events and logical event connectors (OR-gates, AND-gates, etc.). Each event node's sub-events (or children) are the necessary pre-conditions that could cause this event to occur. These conditions can be combined in any number of ways using logical gates. Events in a Fault Tree are continually expanded until sub-events are created for which you can assign a probability. Events in a Fault Tree describe the different levels of system abstraction. Higher nodes represent a high level of abstraction while lower nodes represent a low level of abstraction.

    The main purpose of Fault Tree Analysis is to evaluate the probability of the top event using state-of-the-art analytical and/or statistical methods. These calculations involve system quantitative reliability and maintainability data, such as failure probability, failure rate, expected failure, down time, repair rate, etc.

    Two types of analysis can be conducted using Fault Trees:

  • Qualitative analysis: performed by means of Minimal Cut Sets (MCS) building

  • Quantitative Analysis: it is Calculation of Absolute probabilities, i.e. probabilities of system failures (mean unavailability, unavailability for time T etc.)

    Reports - The FTA module offers the following reports:

  • Minimal Cut Sets

  • Tree diagram

  • Basic events

  • Tree output

  • Unavailability(t) Chart

  • Importance / Sensitivity Analysis

    See also:
    RAM Commander Fault Tree Analysis Software module.
    Other Failure Analysis Methods and Tools

    Download the latest version of RAM Commander V8.2 (November 2011)


 

 
Customers
OOPS. Your Flash player is missing or outdated.Click here to update your player so you can see this content.